DESIGNED FOR LARGE ROOFS

22-GAUGE STEEL GUTTER - THE SUPER 7

STEEL GUTTER

Designed for large roof areas, the Super 7 gutter is formed directly on site in a single piece, with no joints between sections.
Its 7 in. x 7 in. (178 x 178 mm) profile and a back that is higher than the front make it well suited to the drainage needs of commercial, industrial, agricultural and institutional buildings. It can be adapted and anchored to various types of roofs and structures.

ARE YOU A ROOFING CONTRACTOR OR A CONSTRUCTION PROFESSIONAL?

STRONG AND GOOD-LOOKING

WHAT SETS THE SUPER 7 GUTTER APART

Continuous fabrication on site

The Super 7 is formed directly on site in a single piece. This method produces a gutter that matches the length planned for the project, with no joints between sections, no measuring errors and no packaging.

A back higher than the front

The Super 7 is designed with a back that is higher than its front to limit water overflowing towards the building.

Installation adapted to the structure

The gutter can be adapted and anchored to various types of roofs and structures. The fastening method depends mainly on the configuration of the project.

Materials, thicknesses and colours

The Super 7 gutter is available in several materials and thicknesses to meet project specifications.

  • 22-gauge galvanized steel, Galvalume or prepainted steel (0.88 mm / 0.032 in.)
  • Copper: 20 oz (0.686 mm / 0.027 in.)

Prepainted steel gutters are available in the standard colours of the ArcelorMittal Dofasco Perspectra PlusTM or CoolR colour charts, subject to market availability. For a special colour, contact our sales team to check the available options.

Bâtiment commercial à toit cintré équipé d'une gouttière Super 7
Gouttière Super 7 en acier prépeint orange sur un bâtiment
Gouttière Super 7 et descente pluviale sur un bâtiment en hiver
Gouttière Super 7 et barrière à neige Avalanche sur un aréna

SUPER 7 GUTTER

TECHNICAL SUMMARY

Profile

7 in. x 7 in. (178 x 178 mm)

Fabrication

Formed on site in a single piece

Joints between sections

None

Applications

Large roof areas

Materials

Galvanized steel, Galvalume, prepainted steel or copper

Steel gauges

22 (0.88 mm / 0.032 in.) and 24 (0.65 mm / 0.026 in.)

Copper

20 oz (0.686 mm / 0.027 in.)

Downspouts

4 in. x 5 in. (100 x 125 mm)

Hangers

Galvanized steel, 16 gauge

Fastening screws

Stainless steel, 14 gauge, full thread, with neoprene washer

Screw spacing

300 mm (12 in.) on centre

Recommended sealant

Tremco DymonicTM or equivalent

Warranties

10 years on installation, provided Vaillancourt’s recommendations are followed
25 years on materials

PRICE OR INFORMATION REQUEST

Planning a commercial, industrial or institutional roofing project?
Send us your project details to get a price or technical information on the Super 7 gutter.

Contact information

Project details

Plans or technical documents (optional)

FREQUENTLY ASKED QUESTIONS

WHAT TYPES OF BUILDINGS IS THE SUPER 7 DESIGNED FOR?

The Super 7 is designed for large roof areas. It can be used in commercial, industrial, agricultural and institutional projects, and adapted to various types of roofs and structures.

WHAT ARE THE DIMENSIONS OF THE SUPER 7 GUTTER?

Its profile measures 7 in. x 7 in. (178 x 178 mm). The downspouts used with the system measure 4 in. x 5 in. (100 x 125 mm).

WHICH MATERIALS AND GAUGES ARE AVAILABLE?

The Super 7 is available in 22-gauge galvanized steel, Galvalume or prepainted steel. A 20 oz copper option is also available.

WHICH FASTENING METHODS ARE PROVIDED?

Two methods are provided: hangers anchored to the fascia and inserted into the front top clip of the gutter, or self-tapping screws installed through the back at 300 mm (12 in.) on centre. Fastening details must be confirmed based on the project and the installation recommendations.

WHAT WARRANTIES ARE OFFERED?

The Super 7 gutter comes with a 10-year warranty on installation by Vaillancourt, provided the recommendations are followed, and a 25-year warranty on materials.